Home > PTFE Molding Powder >

70% Virgin PTFE Molding Powder SF-30GL Max Sintering Temp. 370-375℃

Product Categories

Sinof Hi-tech Material Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Name: 70 Virgin PTFE Molding Powder SF30GL Max Sintering Temp 370375
Brand: Sinof
Price: 1 USD

Brand Name : Sinof

Model Number : SF-30GL

Place of Origin : China

Contact Now

PTFE Molding Powder (SF-30GL)

Composition: 70% virgin PTFE, 30%±1% glass fiber

Technical Properties

Mechanical Properties	Units	Test Method	NFF
Specific Gravity	g/cm³	ASTM D4894	2.26±0.03
Tensile strength	MPa	ASTM D4894	≥14
Elongation at break	%	ASTM D4894	≥170
Bulk Density	g/L	ASTM D4894	/
Hardness	Shore D	NEEDLE	65-60
Diametric Shrinkage	%	INTERNAL	2.0±0.5
Flow	Sec/120g	INTERNAL	/
Average Particle Size	μm	ASTM D4894	/
Recommended Molding Pressure	400-500kg/cm²
Max Sintering Temp.	370-375℃

Attention:

This product is a fluoroplastic material. Normal precautions observed with fluoroplastics should be followed.

Packaging, Storage and Transportation:

1. The product is packed in two layers of plastic bags in a hard bucket with a net content of 25kg per barrel.

2. The products shall be transported as non-dangerous chemical. During transportation, prevent from humidity, intense vibration and package damage.

3. Products should be stored in a clean, cool and dry warehouse to prevent the mixing of dust, moisture and other impurities.

70% Virgin PTFE Molding Powder SF-30GL Max Sintering Temp. 370-375℃

Product Tags:

70% Virgin PTFE Molding Powder

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinof Hi-tech Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!